EN
CERAMIC PULLEY LAGGING
Manufacturer : ABEAR Industrial
Rubber Backed Ceramic Lagging for optimal traction and minimised belt wear. Available in both Fire Retardant Rubber Compound and our Standard Rubber Compound.
Үнийн санал авах
- The Ceramic Tiles are prepared through an automated spraying process, giving the best possible bond strength results and consistency.
- The rows of Ceramic Tiles are separated by a horizontal groove for dispelling water and dirt.
- The ceramic tiles are embedded in rubber on all sides. This increase in the rubber to ceramic bonded area reduces the likelihood of tile loss under large belt tensions and movement.
- The lagging is supplied standard with a CN Bonding Layer, for easier application and higher bond strengths between the pulley and the lagging.
- The Ceramic Lagging is supplied in 11.5m Rolls or Moulded Strips. The advantages of the 11.5m Roll are no lead times and full versatility to meet any pulley face-width, resulting in smaller inventories for the user/client.
| Property | Test method | Standard | Fire Retardant |
|---|---|---|---|
| Polymer | - | NR/BR/SBR Blend | NR/BR/SBR Blend |
| Specific Gravity | ISO 2781 | 1.090 – 1.130 | 1.160 – 1.200 |
| Hardness (Shore A) | ISO 48 | 60 – 70 | 55 – 65 |
| Tensile Strength | ISO 37 | Min. 23.0 MPa | Min. 17.0 MPa |
| Tear Strength | ISO 1431 | Min. 21.0 N/mm | |
| Elongation at Break | ISO 37 | Min. 440% | Min 430% |
| Modulus at 300% | ISO 37 | Min. 15.0 MPa | Min. 10.0 MPa |
| Abrasion Loss | ISO 4649 | Av. 40mm^3 | Av. 143 mm^3 |
| Midscale Gallery test | SANS13664.8.4 | N/A | PASS |
| Max. Operating Temp. | 70’C | 90’C |
| Alumina Content | 92% |
| Specific Gravity | 3.52 |
| Vickers Hardness | 9.0 GPa |
| Flexural Strength | 275 MPa |
| Compressive Strength | 1.77 GPa |
| Fracture Toughness | 3.75 MPa |